Spirent 思博倫發佈具備領先業界密度和性能的2.5G和5G BASE-T 乙太網測試解決方案

Spirent Delivers First 2.5GbE and 5GbE BASE-T Test Solution with Industry-Leading Density and Performance

 

2016/1/6
思博倫發布的測試解決方案將滿足企業、園區和數據中心網絡對帶寬的需求和限制
 

2016年1月6日– 全球測試與測量試行業的領導者思博倫通信（倫敦證交所上市代碼：SPT）今天宣布了世界上第一種2.5G和5G BASE-T以太網測試解決方案。思博倫DX2 2.5G和5G BASE-T以太網測試解決方案是一種高密度16端口測試模塊，可支持100M / 1G / 2.5G / 5G / 10G以太網接口的線速2至3層測試流量和分析。該系列模塊建立在思博倫以太網測試解決方案的市場領先地位基礎之上，以單插槽刀片的形式兼容思博倫N11U和N4U模塊化機箱，以及思博倫的其它以太網和Wi- Fi產品。

San Jose, Calif. – January 06, 2016 – Spirent Communications Plc (LSE:SPT), an industry leader in test and measurement, today announced the world’s first 2.5G and 5G BASE-T Ethernet test solution. The Spirent DX2 2.5G and 5G BASE-T Ethernet test solution is a high-density 16-port test module supporting line rate Layer 2-3 test traffic and analysis for 100M / 1GbE / 2.5GbE / 5GbE / 10GbE interfaces. Building on Spirent’s market leadership in Ethernet testing solutions, this series of modules has single-slot blades compatible with Spirent N11U and N4U modular chassis and its other Ethernet and Wi-Fi products. 

 

 

思博倫DX2 BASE-T系列模塊已經正式上市，它們使企業和服務商能夠迅速、高效地部署可擴展的高容量解決方案。如採用緊湊型N4U機箱，密度可高達32個多速端口；而N11U機箱則高達192個端口，這些高密度平台支持可節省大量的電力、成本和空間。這些模塊還能夠實現全面的投資保護，包括滿足不同測試需求和要求的多速配置。

Available immediately, the Spirent DX2 BASE-T series modules enable enterprise and service providers to quickly and efficiently deploy scalable high-capacity solutions. Supporting 32 multi-speed ports in a compact N4U or 192 ports in an N11U chassis, these high-density platforms deliver substantial savings in power, cost, and space. These modules provide comprehensive investment protection including several multi-speed configurations to address different testing needs and requirements.

 

 

思博倫是NBASE-T聯盟的成員，該機構的宗旨是在2.5G和5G BASE-T以太網標準方面建立共識。通過與各方緊密合作，該協會發布了最遠100米距離下的2.5和5 Gbps速度的多項規範，且這些規範可以健康利用企業網絡中大量的銅纜等基礎設施。

Spirent is a member of the NBASE-T Alliance, an organization with a mission to build consensus around a standard for 2.5G and 5G BASE-T Ethernet. Working with key stakeholders, the consortium releases specifications that define 2.5 and 5 Gbps speeds at up to 100 meters using the large installed base of copper cabling in enterprise networks.

 

 

NBASE-T聯盟主席Peter Jones指出：“隨著業界開始發售802.11ac Wave 2接入點，企業客戶將可以充分利用提高後的無線帶寬，並在同一接入點上同時運行多個無線流。這將為客戶帶來巨大的價值。”

“As the industry begins the shipment of 802.11ac Wave 2 access points, Enterprise customers will now be ready to take advantage of the increase in wireless bandwidth and the ability to run several wireless streams simultaneously on the same access point,” said Peter Jones, Chairman of the NBASE-T Alliance.  “This will offer tremendous value to customers.”

 

 

據思博倫通信總經理Abhinesh Kastuar稱:“接入點和交換機之間的1Gbps有線以太網連接已經不夠用了。新型接入點需要更高的速度,比如利用現有超5類或者6類銅纜的2.5/5G,只有這樣才能滿足企業、園區和數據中心網絡對帶寬的需求。利用思博倫全新的多速100M/1G/2.5G/5G/10G以太網測試模塊,對今天和未來的企業接入速度進行測試將變得比以往任何時間都更容易。”

According to Abhitesh Kastuar, general manager of Spirent Communications, “A 1Gbps wired Ethernet link between access points and switches is no longer adequate.  The new access points require higher speeds like 2.5/5G over existing Cat5e and Cat6 copper cable infrastructures in order to address bandwidth constraints in enterprise, campus, and data center networks. With Spirent’s new multi-speed 100M/1G/2.5G/5G/10G Ethernet test module, testing for today and tomorrow’s enterprise access speeds has never been easier.”