CT711 RF雜訊產生器和雷達模擬器，是用於WiFi無線區域網絡測試。CT711使用修改後的韌體，以產生微秒精確度的RF雜訊的脈衝串(burst)。突發脈衝串的寬度，間隔和數量都是可設置的。這可以模擬雷達脈衝串，因此可用於DFS的測試。

 

此外，本機可以產生不斷的RF雜訊，來對於WiFi設備的CCA功能進行測試。這是一個測試工具，並應使用在RF隔離箱內或其他不會受到合法RF設備或雷達設備干擾的空間。

 

 

 
Larger Images: board package 

NOTE: This product may have a different hardware configuration than the system pictured above. Refer to your official quote for details.

 

 

 

 

The CT711 RF Noise generator and RADAR Simulator is used for WiFi testing The CT711 uses modified firmware to generate micro-second precision bursts of RF Noise. The burst width, burst spacing, and number of bursts are configurable. This can simulate RADAR bursts and so be used for DFS testing.

 

In addition, this unit can create constant RF Noise to enabling testing CCA features in WiFi equipment. It is a test tool, and should be used in an RF Isolation chamber or other area where you will not interfere with legitimate RF Equipment or RADAR devices.

 

On occassion, especially with certain configured settings, the CT711 may have a corrupted on-air signal or fail to generate any signal at all. For this reason, we suggest testing in conjunction with an RF Analyzer so that you can be sure the on-air signal is as you expect.

 

The CT711 is controlled by the LANforge software suite, which includes a GUI management tool as well as CLI interface for automated scripting.

 

The CT711 has no moving parts and will fit into a small travel bag or briefcase for easy portability. The CT711 includes 2 USB WiFi NIC, RP-SMA Female cable assemblies and USB Cable.