Valid8 (LTE)

網站連結: http://www.valid8.com/

 

Valid8

 

 

LTE終端設備測試 & Core Network Simulator

 

 

Valid8 LTE 核心網路模擬器(Core Network Simulator) 模擬 MME, SGSN, HSS, OCS, PCRF, PDN-GW, ePDG等, 可以對各種LTE interfaces 如S1-MME, S1-U, S3, S4, S5, S6A, S7, SWm, Rx+ 等進行測試。其LTE Pico eNodeB 和 LTE Micro eNodeB搭配Valid8 LTE 核心網路模擬器, 可讓使用者在一個真實的環境測試,無需連接到公共網絡,給予更大的測試靈活性,可以對LTE終端設備進行物理層,協議層和應用層的功能驗證,以及用戶面和控制面的容量、性能和安全性作測試。

  • LTE Micro eNodeB
    這Micro Cell eNodeB可以與Valid8的LTE核心網絡模擬器一起使用,可以通過空中接口用以對終端設備(UE)進行測試。它連接到Valid8的LTE核心網絡仿真器來提供空中接口測試。

    This Micro Cell eNodeB can be used in conjunction with Valid8's LTE Core Network Simulator to enable UE testing over the air interface. It connects to Valid8's LTE Core Network Simulator to provide air interface testing
  • LTE PICO eNodeB
    這Pico Cell eNodeB可以與Valid8的LTE核心網絡模擬器一起使用,可以通過空中接口用以對終端設備(UE)進行測試。它連接到Valid8的LTE核心網絡仿真器提供空中接口測試。


    This Pico Cell eNodeB can be used in conjunction with Valid8's LTE Core Network Simulator to enable UE testing over the air interface. It connects to Valid8's LTE Core Network Simulator to provide air interface testing.
  • LTE Core Network Simulator
    Valid8 LTE Core Network Simulator can simulate MME, SGSN, HSS, OCS, PCRF, PDN-GW, ePDG to enable the testing of LTE interfaces including S1-MME, S1-U, S3, S4, S5, S6A, S7, SWm, Rx+ interfaces.
  • Radius Load Tester
    RADIUS is an IETF standard that defines the protocols for AAA. The Valid8 Radius Load Tester allows you to test client and server devices, test load and feature interaction with a variety of authentication methods.
  • 4G LTE NETWORK DEMO KIT
    Valid8 4G LTE Network Demo Kit provides an all-in-one, cost-effective and ultra-portable LTE network for demonstration, testing and training purposes. There are options availble to include either our real eNodeB if you need to use real 4G UE devices with real web-broswing, or our simulated eNodeB in software if you don't need the RF interface. Sub-systems can be switched on or off depending on how much of the network you need simulated.
  • Diameter Load Tester
    Valid8 Diameter Load Tester allows you to test Diameter clients and servers. It enables continuous testing through the network to report quality and find issues. Rules are set up in the tool to cycle through multiple network destinations according to the test plan. It reports on responses received and transaction time.
  • Policy and Charging Rules Function (PCRF) Simulator
    In the Evolved Packet Core (EPC), the Policy Charging and Rules Function (PCRF) is used to control the policy rules. Today the PCRF plays a significant role in IMS, 3G and 4G Long Term Evolution (LTE) networks, and handles policy control over which network services, QoS and bandwidth a subscriber can access.

    The Valid8 PCRF Simulator enables testing of the Gx interface towards the PCEF, Gateway GPRS Support Node (GGSN) or Packet Gateway (PGW).