Products 產品資訊
產品資訊 Products

 

網站連結: http://www.megiq.com/products

 

MegiQ RF Measurement Tools for IoT Devices

 

         MegiQ 物聯網(IoT)相關產品的射頻量測設備

 

 

 

MegiQ RF Products for IoT Devices

 

 

 

MegiQ provides the tools you need for developing and verifying your wireless products. We  provide RF measurement products that are ready for measurement out-of-the-box. Whether you need to measure an on-board antenna or filter, or to match the antenna to the filter, or you need to measure the radiation performance of your device, we have a solution. Our tools measure all popular communication bands from 400MHz to 4GHz and 6GHz.  Our VNAs are small enough to fit on the workbench but deliver high quality measurements.  Our Calibration kits will put the calibration plane right at the PCB or at the antenna, balanced or unbalanced.  Our Radiation Measurement System measures radiated power without the need of an anechoic chamber.

 

Vector Network Analyzer (VNA)

 

VNA-0440, 0440e, 0460, 0460e

 

The MegiQ Vector Network Analyzer (VNA) products, including VNA-0440, VNA-0440e, VNA-0460, or VNA-0460e,  are compact
Vector Network Analyzers that are used for
professional antenna and network measurement
and optimization.

 

With a frequency range of 400MHz to 4GHz or
6GHz,  they are well suited for characterization  and measurement of S-parameters of 1, 2 and 3 port networks such as antennas, matching networks, amplifiers, filters, power splitters etc. They cover all popular communication bands that are used worldwide.

 

MegiQ's VNA products can be used to characterize wireless devices, like IOT devices, routers, phones, domotica products, electronic gadgets, tablets, laptops, RF-modules etc.

 

The VNA-0460e is full bi-directional 2½-port Vector Network Analyzer that is controlled from a PC through a USB connector.

 

This VNA is ideal for measuring all kinds of micro-circuits like antennas, attenuators, amplifiers etc. Its frequency range includes most popular telecom bands like GSM-GPRS-LTE, Wifi, DECT, GPS, ISM, Zigbee, Bluetooth.

 

With its small size it can also be used near the antenna inside a large device or installation. It's also ideal for on-site measurements.

 

The extra Generator port provides an additional signal port that can be used for measuring 3-port devices.

 

A built-in Bias Generator provides a voltage/current source from -14V to +14V and 100mA. Each of the three ports can be routed to either the bias voltage, ground, or open.

 

Included in the product are VNA-0460e,  PC-software, for controlling, saving data &set-ups, analysis, reporting, etc., Power supply and USB Cable, Documentation, and Carrying case.

 

The VNA-0460e together with the VNA Sandbox as a kit to get started out-of-the-box.   With our VNA Application Programming Interface the VNA-0460e can be used for automated production testing.

#MegiQ Taiwan #MegiQ 台灣
  • Vector Network Analyzer (VNA)
    The MegiQ Vector Network Analyzer (VNA) products, including VNA-0440, VNA-0440e, VNA-0460, or VNA-0460e, are compact Vector Network Analyzers that are used for professional antenna and network measurement and optimization. With a frequency range of 400MHz to 4GHz or 6GHz, they are well suited for characterization and measurement of S-parameters of 1, 2 and 3 port networks such as antennas, matching networks, amplifiers, filters, power splitters etc. They cover all popular communication bands that are used worldwide.
  • RMS-0740 Radiation Measurement System
    The MegiQ Radiation Measurement System (RMS) is a unique turnkey system that will measure Radiation Patterns and Total Radiated Power (TRP) from a 3-axis rotation. While this is usually measured in an anechoic chamber to avoid reflections to affect the measurement, the RMS has a smart antenna design to reduce the sensitivity for reflections. This allows radiation measurements to be made in relatively small lab or office spaces. An extensive evaluation at the Philips Innovations Services (PINS) anechoic labs has shown that in a normal environment the RMS can produce results that are comparable with anechoic measurements.
  • VNA 0440e/0460e Sandbox Kit (VNA 0440e/0460e 配沙箱套件)
    The MegiQ VNA-0440e(0460e)-Sandbox Kit includes VNA-0440e(0460e) and VNA Sandbox. The MegiQ VNA Sandbox is a educational kit, featuring 22 circuits, including a calibration kit. This kit contains a PCB with a dual UFL calibration kit and all kinds of 1-port and 2-port circuits such as resonant circuits, filters, antennas and active circuits. The Sandbox kit comes with an extensive tutorial how to calibrate and measure circuits and explains the results and the behaviour of real-world components and circuits. With all adapters and spare connectors included the VNA Sandbox kit provides a quick way to get started and get results.
  • Balanced and UFL Calibration Kit (校準套件)
    The MegiQ Balanced Calibration Kit is an interface kit for UFL and balanced VNA measurements. It contains SMA-UFL adapters and several adapters from SMA and UFL to balanced pinheaders. The UFL connector was introduced by Hirose as the U.FL connector and became very popular for connecting RF signals in consumer electronics. There are several varieties from other manufacturors and are also known as UMC or UMCC connectors. The UFL calibration kits provides a calibration for UFL footprints for different print stacks (layer thickness). Since it contains a double set of impedances, a full 2-port calibration can be performed in 4 steps instead of 8. The balanced interface has an Open-Short-Load calibration kit using pin-headers. When the same pin-headers are used for the measurement it will be calibrated at the tip of the pins. The kit includes UFL cables and a sampling of UFL sockets and pin-headers for use during the measurements. This Balanced Calibration Kit allows measuring balanced antennas, strip lines, transceiver chip impedances etc.